This box is designed up to minimize the wind profile of a competition shooting box. No need to worry about the box blowing over. It measures 16" x 9" x 9".
Ammo storage area can carry up to three boxes of .45 (depending on what style of ammo box is used) and up to four 50-round boxes of .22. Accepts scopes up to 15" in length and 4" in diameter. Additional room is usually found at either end of the scope storage area for other accesories.
Holds two pistols securely. The lid opens to slightly less than 90 degree angle to keep box balanced, and, it locks in place. This is not an adjustable lid holder. It is either open all the way and locked, or disengaged and the lid is coming down.
Scope and mount not included. I recommend the Hebard mount for mounting any scope in this box. The base location for this mount is already in place on the upper left hand corner of the lid.
The pistol box shown is my personal 2 Gun Horizontal. Note that I left the interior in what appears to be in "The raw." I like the look, and the interior actually has a coat of flat polyurethane to protect it from oil and debris. This finish is available at no extra cost.
This box is also available in pink. (Yes, PINK, the ladies have asked for it.) As of 12/13/12, right-hand with clear interior and pink exterior is in stock.
The scope mount is my own design and is not available for purchase. The screwdriver in the top of the finger is something anyone can do. Drill an appropriately sized hole to fit your screwdriver in the top of the gun-holding finger. The finger makes a good place for a screwdriver that would otherwise be rolling around in the box. Do the same for Allen Wrenches, just make an "X" with a razor blade or similar tool in the felt prior to drilling so the felt doesn't twist around your drill bit.
The pistol area accepts pistols with barrels up to 6" long. Magazine magnets are installed on both ends of scope area. Felt is installed in the front and rear of the pistol area, and in the bottom of the scope storage area.
If you have orthopedic grips on your pistols, it may be a challenge to fit them into this box due to its interior width of 5". For those shooters, please contact us directly for custom width at no extra charge.
Weighs 6 pounds.
Please specify right or left-handed, and Black or Polyurethane interior . This means if you shoot right-handed, you set up the box on your left. If left-handed, you set it up on your right. The reason this is important is that you want to be able to set the box up for ease of viewing through your spotting scope. The Polyurethane interior is clear, meaning that you see wood grain through the coating.
The box has a door-mounted base properly sized for a Gil Hebard mount. (Hebard mount not included)
- Nickel plated hardware
- Scope mounting base already in place
- Metal feet to keep case clear of the bench
- Two side-mounted magnets measuring 6" x 3"
- Briefcase-style luggage handle
- Padded nylon 36" long carrying strap with metal buckles
- Strap loops already installed (for carrying strap)
- Locking hasp with two keys
- Felt covered gun fingers
- Felt covered gun tray bottom
- Felt covered ammunition storage area
- Linex coated for long life
- Available right or left-handed
- Lifetime warranty
- Black or Clear (Polyurethane) interior